WarDragon Pro Enclosure Kit

$12,995.00

Embedded passive RF drone detection supplied complete in its own enclosure with a power system, ready for pole or fixed mounting. ARM processing with DragonOS preloaded. Detects Remote ID and DJI OcuSync activity and outputs CoT to TAK or a customer endpoint.

Detection requires no subscription and no cloud connection.

Form factor Dedicated enclosure, pole or fixed mount
Processing ARM
Detects Remote ID, DJI OcuSync
Power Power system included
Output CoT to TAK or customer endpoint
SKU: WD-PRO-ENC Category:

Description

Description

WarDragon Pro Enclosure Kit is the WarDragon Pro Drop-In Kit supplied complete in its own enclosure with a power system, ready for pole or fixed mounting. It is an embedded passive RF sensor for fixed sites and distributed arrays. It monitors the airspace above the site, identifies drone communications across supported protocols, and publishes detections as CoT to an operating picture or a customer-selected endpoint. Where the Drop-In Kit is installed inside a housing already at the site, the Enclosure Kit brings its own enclosure and power system, so it can be mounted on a pole or fixed structure and run continuously with nobody present.

Detection runs on the device and is included permanently. No subscription, cloud connection, or vendor platform is required for the system to operate, and software releases extending protocol coverage are available to kits already in the field on request.

Intended for integrators, critical infrastructure operators, facilities and campuses, public safety installations, and multi-node array deployments.

Detection coverage

Signal Band Coverage
Remote ID, Wi-Fi 2.4 / 5 GHz Detect and decode
Remote ID, Bluetooth 2.4 GHz Detect and decode
DJI OcuSync 2 / 3 2.4 / 5.8 GHz Detect and decode
DJI OcuSync 4 2.4 / 5.8 GHz Detect and correlate per flight; decode with DragonScope
Analog FPV video 5 GHz race bands Elite kits only; requires the second SDR
Telemetry and control links 900 MHz and multi-band Elite kits only; requires the second SDR

DJI aircraft are identified through OcuSync activity even where Remote ID is absent or disabled.

The kit ships with a paddle antenna set; site-specific antennas are quoted per deployment.

Data output

Destination Detail
Local, standalone Operates with no network and no subscription
ATAK / TAK CoT to a TAK-compatible operating picture
WarDragon Analytics One node or an array to a central map and dashboard
4DV Analytics Detection events forwarded where configured
Customer endpoint Existing middleware, analytics platform, or command-center ingestion

The kit accepts a wired or cellular network connection. Carrier and site network service are provided by the customer.

System and deployment

Component Detail
Processor WarDragon ARM, DragonOS preloaded
Radios WarDragon SDR; dual-band Wi-Fi adapter; Bluetooth 5 Long Range adapter
Antennas Standard paddle set, external SMA connections
Power Power system included
Network DHCP WAN connection
Enclosure Dedicated enclosure ready for pole or fixed mounting

Options

Option Detail
DragonScope Drone ID Service Decodes encrypted DJI identification including OcuSync 4, for serial-number attribution, pilot location, and takeoff point. Annual, licensed per sensor. Internet connectivity required for O4 telemetry.
Cellular WAN upgrade Router for cellular connectivity. Carrier service, SIM, and data plan not included.
Antenna packages Omnidirectional and directional options to extend, shape, or sector coverage. Quoted per deployment.
Multi-Antenna Mount Pole-mounted platform carrying one to six antennas with quick-release mounting.
Integration support Configuration for ATAK, 4DV Analytics, WarDragon Analytics, or a customer endpoint. Quoted per deployment.

Kit selection

Pro and Elite differ in radio count and concurrent processing capacity. Pro runs ARM processing with a single software-defined radio. Elite adds x86 processing and a second SDR, extending coverage to analog FPV video and long-range telemetry and control links. The second radio is fitted at manufacture and is not a field upgrade.

Mobile, Drop-In, and Enclosure kits differ in deployment method. Mobile ships in a hardened carry case and requires no site installation. Drop-In is a DIN-rail enclosure for installation inside existing infrastructure. Enclosure ships complete with its own enclosure and power system for pole or fixed mounting. All run the same platform.

For the same detection set installed inside existing infrastructure, see the WarDragon Pro Drop-In Kit. For FPV and telemetry coverage in this form factor, see the WarDragon Elite Enclosure Kit.

GSA Schedule. Available on GSA Multiple Award Schedule under contract GS-07F-0031W, held by Millenium Products, Inc. Schedule orders are not placed through this site — use the contact form to request a schedule quote.

You may also like…